Custom Anodes

JA Electronics is your source for platinum, rod, graphite, and magnesium anodes. We provide all backfill materials required for galvanic and impressed-current anodes in your cathodic protection system. Contact us with your specifications.

(click for larger views)

Platinum Anodes

Available in customized suspended or thru-hull configuration
Available with 200 μin., 300 μin., 400 μin., 600 μin., and 800 μin., platinum thickness
Available in ⅜", ½", ⅝", and ¾" rod diameters, of various lengths, to meet your specific requirements.
Anode housing body available in Delrin,^® UHMW Polyethylene, or Teflon^®
Thru-hull anodes available with perforated shield on anode element for protecting the anode surface
⅛" platinum wire anode available in custom lengths

Magnesium Anodes

Normally used to prevent corrosion of buried and submerged structures
Magnesium has the highest driving potential of any sacrificial anode
H1 alloy prepackaged anodes (specify anode weight, cable size, and length)
High potential prepackaged anodes (specify anode weight, cable size, and length)
Drivable spike magnesium anodes (1.315" x 12" or 1.315" x 18")

Graphite Anodes

Available with linseed oil, wax, or resin treatment
Available as center connect or end connected
Anodes available with epoxy end cap or with heat shrink cap
Prepackaged canister anodes available, backfilled with specified Loresco^® coke breeze

Reference Electrodes

Portable copper/copper sulfate reference electrodes
Permanent, direct burial copper/copper sulfate, silver/silver chloride, and zinc electrodes
Custom thru-hull silver/silver chloride reference electrodes with UHMW body